top of page
TALOS C730
Automatic bollard for perimeter security
Hydraulic Automatic oil-hydraulic system, 230 Vac
 
PERIMETER SECURITY
Intended for traffic control and protection of those sensitive areas (military stations, police headquarters, airports, etc.), where a high level of perimeter security is needed against terrorist attacks. Designed and tested to withstand, in a single bollard configuration, a vehicle of 7,5 t at a speed of 48 km/h.
OIL-HYDRAULIC
Hydraulic locking device in standing position (standard) and emergency manual lowering by a release spanner supplied with the equipment. Burglar-proof cover plate preventing the release system from being accessed and thus the bollard from being lowered.
STRONG
Scratch-proof cataphoresis treated and polyester powder coated steel rising cylinder. Available also with an AISI 304 stainless steel cover sleeve, thickness 12/10. Breakout resistance: 750.000 J.
Connector and junction box IP 66 for cabling. Hall effect limit switch sensors, cylinder head with rubber edge and incorporated LED lights.
VERSATILE
A vast range of command and safety accessories allow for reliable and precise control of the installations. Beeper to signal the movements. Heating device for installations in very low temperature conditions (-40 °C) where snow and ice are frequent. The electronic control unit can be set so that it can manage several bollards at a time.

TALOS C730

SKU: 9685L
£0.00Price

  • Fully retractable, heavy duty, automatic bollard consisting of an oil-hydraulic motor-pump unit incorporated inside the main structure and an oil-hydraulic actuator inside the moving cylinder. Suitable for the protection of sensitive areas where a high level of perimeter security is needed. Tested and certified in compliance with ASTM F2656-18A C730, PAS 68:2013 V/7500 (N3)/48 and IWA 14-1:2013 V/7200 [N3C]/48 Norms. IP 67 and designed to withstand, in a single bollard configuration, a vehicle of 7,5 t at a speed of 48 km/h. Height from ground level is 1.000 mm. Scratch-proof S355J2H steel cylinder, thickness 12 mm and ø 275 mm, cataphoresis treated and polyester powder coated (an AISI 304 brushed stainless steel cover sleeve available). Cylinder head made of aluminium fitted with rubber edge and 12 amber-colour integrated LED lights, burglar-proof cataphoresis treated aluminium cover plate. Head and cover plate are slip-proof and tread resistant. Moving cylinder fitted with an approved retro-reflecting, high intensity micro-prismatic adhesive film (h 80 mm). Hot-dip galvanized steel pit. Release spanner with a triangular socket allowing manual lowering in an emergency. Impact resistance 250.000 J, breakout resistance 750.000 J, static load max 1.500 kg (bollards in raised position), max 20.000 kg (lowered). Working temperature -40 ÷ +80 °C. Supply voltage 230 Vac ± 10%, 50 Hz. Absorbed power 1.850 W. Rising time ~ 5,00 s. Intensive use 2.000 cycles/a day.

    • Cylinder diameter (mm): 275

    • Cylinder thickness (mm): 12

    • Cylinder height from ground (mm): 1.000

    • Cylinder material: S355J2H steel

    • Cylinder treatment and finishing: cataphoresis and polyester powder coating RAL 7016

      AISI 304 brushed SS steel sleeve

    • Pit: hot dip galvanization

    • Rising time (s) [cm/s]: ~5,00 [20]

    • Lowering time (s) [cm/s]: ~4,20 [23]

    • Working temperature (°C): -20 ÷ +80 (-40 with heater)

    • Oil type: 708L

    • Power supply (Vac – Hz): 230 - 50

    • Absorbed power (W):1.850

    • Absorbed current (A): 5

    • Grade of protection P / motor-pump: 67

    • Frequency of use (cycles/day): heavy duty / 2.000

    • Impact resistance (J): 250.000

    • Breakout resistance (J): 750.000

    • Maximum static load (kg): 20.000

bottom of page