700 Series – Dual‑Board Modular Control Cabinet System

The dual‑board architecture lets installers run

• Two identical control boards
• Two different manufacturer boards
• A main board + secondary logic board
• A gate board + access control board
• A gate board + safety/expansion board

Enclosures

• Mild Steel: 700H x 500W x 250mmD Wall Mounting Enclosure IP66 RAL7035 (order code EN0013)
• GRP: 747H x 536W x 300mmD Wall Mounting Enclosure IP66 RAL7035 (order code EN0042)
• Mild steel: powder‑coated, high durability, ideal for commercial and outdoor sites
• GRP: lightweight, corrosion‑resistant, UV‑stable, perfect for coastal or damp environments, easy to drill and customise

Each 10A circuit includes

• 10A MCB (one per control board)
• Double‑pole isolator (internal or external depending on model)
• 3 × 5mm × 20mm fuse holders per circuit
• Neutral & earth terminal blocks
• Clean, trunked wiring throughout

Shared component

• One 20A, 250V, 50–60Hz EMI filter
• Feeds the cabinet before the circuits split
• Reduces electrical noise
• Protects both control boards and all ancillary equipment

Mains circuit order codes

• External rotary isolator, 10A MCB-main circuit, 6A MCB-lighting circuit - 700-MAINS LOOM-001
• External rotary isolator, 10A MCB-main circuit - 700-MAINS LOOM-002
• Internal Double Pole Isolator, 10A MCB-main circuit, 6A MCB-lighting circuit - 700-MAINS LOOM-003
• Internal Double Pole Isolator, 10A MCB-main circuit - 700-MAINS LOOM-004

Why dual circuits matter

Each control board receives its own protected, isolated, and independently fused power feed, making the 700 Series ideal for:

• Dual‑motor systems
• Mixed‑brand control boards
• Access control + gate control combinations
• High‑end commercial installations
• Systems requiring clean separation of logic and power

How the modular system works

• Each board has its own dedicated terminal section
• Ancillary equipment (PSUs, relays, detectors, etc.) is wired into the same rail
• Field wiring connects into the rail, not the boards
• Engineers can isolate, test, and modify wiring without disturbing the boards

Installer benefits

• Clean separation of logic between Board A and Board B
• Rapid fault‑finding — every connection is accessible and labelled
• Easier commissioning — test each board independently
• Future‑proof — upgrade boards or add accessories without rewiring
• Consistent layout across all 700 Series cabinets

Door plate option

Add a door‑mounted equipment plate for low‑profile devices such as receivers, timers, relays, small PSUs and logic modules. This keeps the main mounting area clear for the dual control boards.

Dual control board selection

• Customer‑Supplied: use your preferred manufacturer boards (FAAC, BFT, NICE, Beninca, Fadini, etc.)
• Control 101‑Supplied: we install both boards for you. Your cabinet arrives ready for wiring and commissioning.

Power Supply Kits (PSUs)

• 12V DC: 20W (1.67A), 40W (3.33A), 60W (5A), 100W (7.5A)
• 24V DC: 20W (1A), 40W (1.7A), 60W (2.5A), 100W (4A)

Loop Detector Kits

• 230V AC: Single Channel, Double Channel
• 24V: Single Channel, Double Channel

Magnetic Lock Relay Kits (KIT 1)

Double Pole, 8A relays with 110VAC, 12VAC, 230VAC, 24VAC, 12VDC or 24VDC coil.

More kits

• Key Switch Kits: Hold Open, Deadman (constant pressure)
• Emergency Stop Options: a selection of E‑Stops for safety and compliance
• Time Switch Kits: 1‑Channel or 2‑Channel
• Internal Lighting Kits: 1 or 2 internal lights (no PSU)
• Battery & Bracket Kits: backup batteries, battery mounting brackets, wiring harnesses